• Address: Windsor, CT 06095 (map)
• Date Posted: 09/22/09

Yamaha RX-V795a Natural Sound Home Theater Receiver 85w
$250
In great shape, lots of features, used several years and currently connected. I am updating my home system. Comes with manual and remote.
The RX-V795a is a 5-channel receiver providing finest performance and processing available for music and video sound. Yamaha's Digital Sound Field Processing,
Cinema DSP, and Tri-Field Processing are all included as are Dolby Surround Pro Logic, Dolby digital, and DTS processing.
See reviews here: http://www.hometheaterhifi.com/volume_6_4/yamaha-rx-v795a-receiver.html
http://www.audioreview.com/mfr/yamaha/a-v-receivers/rx-v795a/PRD_118881_2718crx.aspx
25 DSP/CINEMA & MUSIC DSP PROGRAMS -- INCL. 70mm MOVIE THEATER CINEMA DSP*
DOLBY PRO LOGIC
ON-SCREEN DISPLAY WITH SPEAKER TEST MODE
PRE-OUTS FOR ALL CHANNELS INCLUDING SUBWOOFER
6-CHANNEL INPUTS FOR EXTERNAL DECODER
NEW SLIM-LINE UNIVERSAL REMOTE CONTROL
THREE DIGITAL INPUTS*
The RX-V795a can accommodate three digital sources DVD/LD, TV/DBS and CD. The DVD/LD input has both optical and coaxial digital connections.
AUTO PRIORITY INPUT SELECTION
When different input formats are connected from the same source, the RX-V795al automatically prioritizes them and selects in order AC-3RF, optical digital, coaxial digital, and finally the analog input.
AUTO SOUND DECODER
The RX-V795a senses a DTS or Dolby Digital signal and will automatically switch the receiver to the appropriate mode when the signal is detected.
REAR PANEL I/O JACKS FOR MULTI-ROOM CAPABILITY
LOW IMPEDANCE DRIVE CAPABILITY AND IMPEDANCE SWITCHING
LINEAR DAMPING FACTOR CIRCUIT
BASS EXTENSION CONTROL
Accentuates the bass by adding a 7 dB boost at around 70 Hz.
TONE BYPASS SWITCH
Allows you to bypass the bass and treble controls and provides a flat, pure signal.
A/B SPEAKER SELECTOR
Allows you to bypass the bass and treble controls and provides a flat, pure signal.
SLEEP TIMER
Permits a delayed receiver turn off. You can set it for up to two hours in 30 minute increments.
40-STATION DIRECT ACCESS PRESET TUNING
Power, Min. RMS Output power/ch., 8ohms MAIN: 20 to 20 kHz, 0.04% THD = 85W, CENTER: 20 to 20 kHz, 0.04% THD = 85W, REAR: 20 to 20 kHz, 0.04% THD = 85W
Dynamic Power Per Channel (Main Channels) 8/6/4/2/ohms = 115/140/170/200W
Damping Factor 20 to 20 kHz, 8ohms = 80
Frequency Response 20 to 20 kHz = +/-0.5 dB (CD)
Total Harmonic Distortion, 20 to 20 kHz CD = 0.025%
Signal-to-Noise Ratio, IHF-A Network CD = 96 dB
mailto:desmo907@hotmail.com